LIMBOPLAST D580 plain / structure / profile
Cold plastic
LIMBOPLAST D580 belongs to the group of solvent-free, multi-component, reactive systems and consists of two or more components which – through chemical interaction – form a duroplastic compound that cannot be thermally plastified any more.
LIMBOPLAST D580 has been tested and approved by several test reports on the turntable simulator at the German Road Institute (BASt) as TYPE I and TYPE II (rain safety marking) marking:
- Plain: LIMBOPLAST D580 plain can be applied as conventional marking and as rain safety marking with enhanced wet night visibility.
- Structure: LIMBOPLAST D580 is exclusively applied as agglomerate-type rain safety marking with enhanced wet night visibility. It is characterized by an open structure (agglomerates) with excellent drain effect and good resistance against snowploughs.
- Profile: LIMBOPLAST D580 targeted profile spacings create acoustic and vibratory effects for more safety.
RPA - Test Reports for LIMBOPLAST D580 plain / structure / profile
Test report-no. | Layer thickness | Consumption | Drop-on material (DOM) | Traffic technological properties | ||
mm | Material | DOM | Identification (divergent identification possible - see relevant test report) | New condition | Used condition | |
kg/m² | kg/m² | |||||
Structure marking / Regular agglomerates type II | ||||||
1.5-3.0 | 2.60-2.80 | 0.50 | SWARCO SOLIDPLUS 10 P21 T18 | P7, S0, R5, RW6, Q5, T3 | P7, S0, R5, RW5, Q5 | |
Structure marking / Irregular agglomerates type II | ||||||
1.5-3.0 | 2.60-2.80 | 0.50 | SWARCO SOLIDPLUS 10 P21 T18 | P7, S0, R5, RW6, Q5, T3 | P7, S0, R5, RW4, Q5 | |
Plain marking | ||||||
Type I marking | ||||||
2.0 | 3.68 | 0.45 | SWARCO SOLIDPLUS 10 P21 T18 M25 | P7, S1, R4, Q5, T3 | P7, S1, R5, Q5 | |
3.0 | 5.52 | 0.45 | SWARCO SOLIDPLUS 10 P21 T18 M25 | P7, S1, R5, Q5, T3 | P7, S1, R5, Q5 | |
Type II marking | ||||||
2.0 | 3.68 | 0.45 | SWARCO SOLIDPLUS 10 425-1400 T18 MK30 | P7, S1, R4, RW4, Q5, T3 | P7, S1, R4, RW4, Q5 | |
3.0 | 5.52 | 0.45 | SWARCO SOLIDPLUS 10 425-1400 T18 MK30 | P7, S1, R4, RW5, Q5, T3 | P7, S1, R4, RW4, Q5 | |
