VARIABLE INSTALLATION DEVICES
For Any Situation
SWARCO BASE PLATE TYPE II
Suitable for installing traffic sign combinations of many different
sizes with a ground clearance of 1500 mm. A tubular post (Ø 60
mm) is attached and detached by means of a foot-operated release
lever in the base plate. The number of base plates can be
adjusted as required.
Stability classes have been determined in line with ZTV-SA.
Dimensions of the base plate: 1950 x 450 mm
Dead weight: approx. 28 kg
Standing torque between 0.268 kNm and 1.44 kNm 7 8
For fast assembly of diversions, lane transfer boards, or oversized
traffic signs on a tubular steel pole or two tubular lattice
towers. Circumferential channel steel frame U 120 with transverse
members, concrete-lined with reinforced concrete B25, 4
clevis-type eyelets and a fastening plate for tubular steel poles of
Ø 108 -152 mm.
Foundation size: 3000 x 1000 x 120 mm
Total weight: approx. 760 kg
GST SIGN SUPPORT
With a pole Ø 60 mm and an SM clamp Ø 60 mm, the GST Sign
Support becomes a universal support structure in the construction
site area for signs up to 2.5 m2 with 1500 mm ground clearance.
Depending on the chosen load of TL safety base plates, stability
classes K4 up to greater than K9 can be realised in accordance
with TL installation devices #97. Assembly of the support and insertion
of the pole with a fastened sign is carried out easily as a
result of the stay tube‘s assembly position.
Dimensions of the device: 2750 x 560 x 135 mm
Dead weight approx. 68 kg
VARIABLE DIVERSION BOARD
SWARCO‘s variable diversion board has a specially profiled aluminum
frame on the front with woven wire mesh made from PVC-sheathed
wire. The prepared information board is easily assembled,
dismantled, or updated on this frame.
Size: 1875 x 1250 mm, foil type 1 or type 2