SWARCOTHERM HP 62 / HP 62E

Thermoplastic

SWARCOTHERM HP 62 / HP 62E Thermoplastic

Thermoplastic is a hot-applied marking material that creates highly reflective road markings with a long service life. Thermoplastic is based on hydrocarbon resins and contains a high proportion of pre-mixed glass beads. Since thermoplastics have to be melted before being applied to the road surface, special marking machines with cookers are required. There are different application methods depending on the desired final result. The PE bags in which the material is packed are part of the formula and are melted down so that no waste is produced during marking.

Thermoplastic enables high-quality road markings and impresses above all with increased durability, excellent reflection values by day, night and wetness and offers additional possibilities for increasing road safety, for example in the form of audible and perceptible markings.

RPA – TEST REPORTS BY BAST FOR
SWARCOTHERM HP 62 / HP 62E

Test report-no.

Layer thickness

Consumption

Drop-on material (DOM)

Traffic technological properties

mm

Material

DOM

Identification

(divergent identification possible - see relevant test report)

New condition

Used condition

kg/m²

kg/m²

Type I marking

2003 1DH 01.04

3,0

6,0

0,35

SWARCOLUX P21  T14 M25

P7, S4, R4, Q5, T2

P7, S1, R3, Q5

Downloads

Downloads