Fullgrafiske LED skilt

Dynamisk trafikkstyring på motorveier og byområder

Fullgrafiske LED skilt Dynamisk trafikkstyring på motorveier og byområder

SWARCOs VMS LED skilt har moderne optisk kvalitet i signalisering og brukes over hele verden til dynamisk trafikkstyring på motorveier og byområder. 

Alle VMS LED skilt er sertifisert av Notified Body SGS / INTRON og BASt i samsvar med kravene i den oppdaterte versjonen av EN12966 og gir fremragende lesbarhet, energieffektivitet og et utmerket luminansforhold. Vår patenterte linseteknologi gjør det mulig å montere den optiske linsen direkte i matriseplaten - det er ikke behov for forvrengende frontskjerm. Vårt unike optiske design unngår problemene knyttet til refleksjoner. Selv ved lav solstilling (5 °) oppfyller luminansforholdet de høyeste kravklassene for best mulig lesbarhet. 

Typiske anvendelser av Fullgrafiske VMS LED skilt inkluderer rute /informasjon for omruting, advarsler (ulykker, trafikk), tollpriser og annen spesiell informasjon.  


 Overvåking og 
Feilrapportering


Beste optisk 
Ytelse


Høyeste 
Kvalitets LED 


Diverse 
Pikselalternativer 

  • Worldwide integration in traffic management systems using different interfaces and protocols for control and data exchange 
  • The patented LED optical system
    • provides highest optical performance
    • directs the LED light to where it is needed
    • allows down to 97% reduction of LED forward current (depending on pixel pitch), maintaining all optical requirements with highest performance of brightness and contrast during the whole life cycle of the variable message sign, therefore increased availability and lowest energy consumption
  • All LEDs are continuously monitored, even when they are off; LED status will be reported to the traffic center or to a local control
  • Conformity to EN 12966:2014+A1:2018: more than 100 class-combinations of different colour, luminosity, contrast, beam width, pixel pitch, LEDs, forward current, etc. have been tested and certified by SGS/INTRON
  • A wide range of pixel pitch options from 12mm to 35mm, fitting to any application
  • The onboard operating system of the variable message sign provides permanent diagnosis and reports any error status to the central system
  • Full traceability of all used assemblies in the internal data base
  • A pulse width modulated at a constant  very low level current increases LED life time and avoids ageing effects and loss of luminosity 
  • Use of cutting edge LED technology: only highest quality LEDs from renowned manufacturers are used
  • Higher resolution by small pixel pitch (12mm with RGB) fulfilling most demanding requirements of EN 12966 (including contrast)
  • Quick and easy replacement of parts without use of tools
  • Reliable power supply for LED displays and controller
  • Optimised stability by proven construction
  • Light weight by weight-saving construction using non-corrosive aluminum or stainless steel reduces costs of structural system
  • Attractive and modern design
  • Adaptable to different ambient light conditions
  • Integrated sensors for temperature and light


Tekniske detaljer


Light source

High Power LEDs from renowned manufacturers

Housing

Modular design principle in seawater-proof, powder-coated profiles made of aluminum AlMg3 or stainless steel (V4A, 1.4571)

Protection classes

IP45 – IP65

Temperature classes

T1 (-15°C to +60°C) / T2 (-25°C to +55°C) / T3 (-40°C to +40°C) / T4 (-15°C to +55°C including sun radiation)

Humidity range

20 – 95% rel. humidity

Controller

  • Embedded controller designed for industrial temperature range: -40 to +85 °C
  • Integrated fast access solid state data memory
  • High speed picture interface using Dual port RAM and FPGA technology
  • Number of colours: monochrome, traffic colours or RGB
  • typ. picture rate 10 frames/second

Interfaces

  • RS485/RS422, Profibus, Profinet, Ethernet IP, WLAN others on request
  • TCP/IP connection via RJ45
  • digital inputs
  • digital and analogue sensors

Mounting options

C-rails

Pipe clamps

Other constructions on request

Protocols

FC2

FC2 via profibus

TLS 2002 / 2010

XDR/DAP

NTCIP

UTMC

others on request

Optics

Optical equipment fits into the matrix

luminance ratio (contrast) up to 100, even at low sun position <5°

Pixel pitch

(freely programmable VMS)

12 / / 15 / 16 / 20 / 25 / 30 / 35 mm

Light distribution

For all VMS's, beam width classes from B1 to B7 can be fulfilled with the highest luminance class L3(*) and luminance ratio R3 for various element spacings

Matrix

Anodized aluminium and coated – avoiding the front screen is standard

Power supply

80 - 265 VAC

12 - 48 VDC

Optional: photovoltaics, wind turbine, fuel cell

Maintenance access

Easy maintenance access

Rear door or front matrix access (depending on the type of variable message sign)

Certification

EN 12966:2005+A1:2009

CE-certification by SGS/INTRON

BASt-certified

Downloads

Downloads