LIMBOTHERM PM297

Thermoplastic

LIMBOTHERM PM297 Thermoplastic

Thermoplastic is a hot-applied marking material that creates highly reflective road markings with a long service life. Thermoplastic is based on hydrocarbon resins and contains a high proportion of pre-mixed glass beads. Since thermoplastics have to be melted before being applied to the road surface, special marking machines with cookers are required. There are different application methods depending on the desired final result. The PE bags in which the material is packed are part of the formula and are melted down so that no waste is produced during marking.

Thermoplastic enables high-quality road markings and impresses above all with increased durability, excellent reflection values by day, night and wetness and offers additional possibilities for increasing road safety, for example in the form of audible and perceptible markings.

RPA TEST REPORTS BY BAST FOR LIMBOTHERM PM297

Test report-no.

Layer thickness

Consumption

Drop-on material (DOM)

Traffic technological properties

mm

Material

DOM

Identification

(divergent identification possible - see relevant test report)

New condition

Used condition

kg/m²

kg/m²

Typ I Markierungen

2005_1DH_01.05

3,0

6,30

0,35

Swarcolux P21

P7, S3, R4, Q5, T2

P7, S2, R3, Q4

Die LIMBOTHERM PM297 wurde bei der BASt als Einlegematerial auf Formbeständigkeit geprüft.

Lataukset

Lataukset