LIMBOPLAST KSP 140
Cold Spray Plastic
LIMBOPLAST KSP 140 belongs to the group of solvent-free, multi-component, reactive systems and consists of two or more components which chemically react with each other. It can be applied as type I marking as well as type II rain safety marking and has been testet on the wear simulator at the German Road Institute (BASt).
RPA Test Reports by BAST for LIMBOPLAST KSP 140
Test report-no. | Layer thickness | Consumption | Drop-on material (DOM) | Traffic technological properties | ||||||||||||||||
mm | Material | DOM | Identification (divergent identification possible - see relevant test report) | New condition | Used condition | |||||||||||||||
kg/m² | kg/m² | |||||||||||||||||||
Type Imarkings | ||||||||||||||||||||
| ||||||||||||||||||||
Type II markings | ||||||||||||||||||||
0,6 | 0,834 | 0,50 | SWARCOLUX 50 425-1400 T18 MK30 | P7, S1, R5, RW6, Q5, T3 | P7, S1, R5, RW5, Q5 | |||||||||||||||
0,7 | 0,973 | 0,70 | SWARCO SOLIDPLUS 10 425-1400 T18 MK30 | P7, S1, R5, RW4, Q5, T2 | P7, S1, R5, RW5, Q5 | |||||||||||||||
