sujet

Polyurethane two component system

SWARCO VICAS offers the following polyurethane two component products:

PRIMER

A two component performant coating product, used as first layer on metallic surfaces, in a wide range of painting systems (polyurethane, epoxy, alkyd, alkyd urethane). Forms an excellent quality anticorrosive polyurethane film, ensuring the adherence between the surface and the next layer in the painting system. May be applied on: steel, stainless steel, new or aged galvanized steel, aluminum, copper, brass, bronze. Fast dry (2 hours at 23±2°C or 1 hour at 80±2°C). Excellent adherence, flexibility, hardness, impact and abrasion resistance.

Component A

Oxide red, gray

Mixture: component A:component B=100:4,5

Component B: Hardener

Semi glossy ENAMEL

Resistant to weather, alkali environments, salts, oil products. Final layer for metallic surfaces found in industrial, chemical agressive, marine environments, used in the naval, oil, railway and metallic construction industry. A very good adherence and color time resistance, hardness, good flexibility, very good abrasion resistance, excellent impact resistance. Air dry (23±2°C) 10 hours or oven (80°C) 1 hour.

Component A

Colors according to RAL card

Mixture: component A:component B=100:4,5

Component B: Hardener

Glossy ENAMEL

Final layer in the protective coating of metallic surfaces used in industrial, chemical agressive and marine environments, in the naval, oil, railway and metallic construction industry. Also used for road vehicles (only in plants authorised according HG 699/2003). Very good adherence, high gloss and excellent time resistance of color and gloss, hardness, good flexibility, very good abrasion resistance, excellent impact resistance. Air dry (23±2°C) 10 hours or oven (80°C) 1 hour.

Component A

Colors according to RAL card

Mixture: component A:component B=100:9

Componenta B: Hardener

PU THINNER