sujet

Alkyd melamine system

SWARCO VICAS offers the following alkyd melamine products:

PRIMER S. 5068 - GRUNDZIV

Primer used as first layer for the protection of metal surfaces and for the finishing of road vehicles (in authorised plants, according to HG 699/2003), in order to prevent corrosion and ensure adherence between the metallic surface and the next layer. Used for interior and exterior. Air dry (23±2°C) 4 hours or oven (80°C) 1 hour. Opaque films, flexible, resistant to impact, very hard.

Available colors: oxide red, gray, black.

PUTTY S.5201

Used for leveling metal surfaces, vehicle bodies, machines and equipment. Air dry (23±2°C) 14 hours or oven (80°C) 1 hour (thickness of film 0,5 mm). Hard films, resistant, high adherence, flexible, impact resistance.

Available colors: gray.

ENAMEL S.5068 - EMABRILL

High gloss enamel, air dry (23±2°C) 14 hours or oven (80°C) 1 hour, for interior and exterior. Used as final layer on surfaces protected with primer 5068 or epoxy primer, in anticorrosive finishings of metallic surfaces. Used for machines, equipment and also road vehicles (in plants authorised according HG 699/2003). The formed film has a perfectly smooth apperance, high adherence and hardness.

Available colors: white, gray, light blue, light green, ocher, oxide red, brown, black, yellow, red, green, glossy/opaque kaky, blue, glossy/opaque black.

ALUMINUM BRONZE ENAMEL S.5068 - EMAVILAL

Fast drying enamel, silver film, excelent adherence, flexibility and hardness, time resistant. Used on surfaces primed with 5068 or epoxy primer. Also used for the anticorrosive protection of metallic surfaces, including machines and equipment. Air dry (23±2°C) 14 hours or oven (80°C) 1 hour, interior and exterior.

Available colors: silver.

ENAMEL S.5001 - AUTOVIROM

High gloss enamel, perfectly smooth appearance, hardness, excellent surface adherence. Air dry (23±2°C) 14 hours or oven (80°C) 1 hour, interior and exterior. Used for surfaces protected with primer 5068 or epoxy primer, in anticorrosive finishings of metallic surfaces, also for machines, equipment and also road vehicles (in plants authorised according HG 699/2003).

Available colors: white 10,13, cream 40, 427, beige 47, gray 81, 83, 85, 87, 89, blue 61, 63, 616, yellow 44, 48, 49, 1018, orange 331, blue 65, 68, red 25, 27, 2002, red 28, green 57, 6017, brown 74, black 90, green 56, 6026, kaky MFA glossy/opaque.

ENAMEL - LOVITURA DE CIOCAN (HAMMER STRIKE)

Textured enamel, air and oven dry, applied on metallic surfaces primed with 5068 or epoxy primer, for machines and equipment, interior and exterior. Excellent hardness, adherence and flexibility. Air dry (23±2°C) 14 hours or oven (80°C) 1 hour.

Available colors: silver, dark gray, blue, pink, mauve, green, light gray, kaky.

THINNER - AUTODIL