LIMBOPLAST D230

Cold Plastic

LIMBOPLAST D230 Cold Plastic

LIMBOPLAST D230 belongs to the group of solvent-free, multi-component, reactive systems and consists of two or more components which – through chemical interaction – form a duroplastic compound and cannot be thermally plastified thereafter. It´s suitable for bituminous surfaces (e.g. mastic asphalt, asphaltic concrete) and also concrete pavements (priming required). It has been tested as type I and type II marking on the turntable simulator at the German Road Institute (BASt). 

RPA Test Reports by BAST for LIMBOPLAST D230


Test report-no.


Layer thickness


Consumption


Drop-on material (DOM)


Traffic technological properties


mm


Material

DOM

Identification

(divergent identification possible - see relevant test report)

New condition


Used condition


kg/m²

kg/m²

Type I marking

2004 1DK 07.03


2.0


3.90


0.32


Swarcolux P21

P7,S2,R5,Q5,T3

P7,S1,R5,Q5


2004 1DK 07.02

3.0


5.85


0.32


Swarcolux P21

P6,S1,R5,Q5,T3

P6,S1,R5,Q5


Type II markings

2000 1DK 02.16 *

3.0


5.85


0.52


Megalux 0.6-1.5 KT14

P7,S3,R5,RW6,Q5,T3


P7,S1,R5,RW5,Q5


* You can find this certificate on the Bast release list under the applicant Röhm. 

Downloads

Downloads