sujetsujet

IG946

Four-channel loop detector with CAN-bus for DIN-rail mounting

The 4 channel loop detector IG946 is used for signal output in traffic light installations via CAN bus and switching outputs as well as for traffic counting. The detector is designed for DIN-rail mounting and includes a complete overvoltage protection module for the inductive loops.

The IG946CAN is an inductive loop detector for the connection of up to four inductive loops and was specifically developed for traffic technology applications.

The IG946 offers the functions and outstanding features of the SWARCO TRAFFIC SYSTEMS induction loop detectors in 19“ plug in technology as a DIN rail version and includes a complete overvoltage protection module in one device. This integration minimizes the wiring effort and significantly reduces the required space.

The IG946 has a serial CAN bus interface for data transfer. The bit rate is automatically recognized in a range of 10-500 kbps and the addressing can be effected by a DIP switch.

The CAN protocol is specifically designed for traffic control applications. Standard data contents are e. g. detection status, error status and detection edges with occupancy time respectifly time gap. In double loop systems additional data as vehicle speed, length and direction are transmitted. Via the CAN bus interface the full parameterization of the detector is also possible.

The detector processes the loops one after the other in a predetermined sequence (multiplex mode); i.e. there is always only one loop switched as inductance L to the LC oscillating circuit of the detector. Since there is always only current flow through one loop, the channels of a detector cannot interfere with each other.

If a metallic object is located within the range of action of the connected induction loop, the frequency of the LC oscillator also changes owing to reduction in the loop inductance. This change is determined by the detector evaluation circuit and, if the turn-on threshold is exceeded, a busy signal occurs on the switching outputs of the channel (open collector). Different output functions, e.g. presence signal and pulse signal are possible.

The detector is configured using the serial service interface on the front of the unit. The free PC service software LoopMaster provides a convenient operator interface for modifying and displaying all parameters and diagnostic values. The configured parameters are stored in a non-volatile memory (EEPROM

  • CAN bus interface functions:
    Detection status, error status, detection edges with occupancy time and time gap, e.g. for determining the occupancy rate for congestion detection, complete parameterisation, additional single vehicle data when using double loop systems (speed, length, driving direction)
  • Easy and space-saving integration due to DIN rail mounting
  • TBUS system: bus system integrated in DIN rail for power supply, CAN bus interface and detector synchronization
  • Complete integrated overvoltage protection for inductive loops, no additional components necessary
  • Wide power supply range: 10 V DC - 38 V DC, nominal voltage 24 V DC
  • Wide inductance range: 20 μH - 2000 μ
  • 4 open collector switching outputs for detection signals
  • Convenient operation by means of SWARCO TRAFFIC SYSTEMS PC operating program LoopMaster
    via Service Interface, Saving of unit - or application-specific parameter sets by means of LoopMaster
  • Variable parameterisation allows use in practically all application fields of induction loop technology
  • Bus classification function with output on CAN bus and switching output
  • Directional logic with output on switching output
  • Loop activation in multiplex mode
  • Wide adjustment range for the base frequency
  • Low power consumption
  • Nonvolatile storage of the operating parameters in EEPROM
  • Detector synchronization
  • Service interface in front

Supply voltage

nominal voltage 24 V DC, range: 10 V DC - 38 V DC

Power consumption

0.7 W with 24 V DC

Loop inductivity

allowed range: 20 μH - 2000 μH; recommended range: 80 μH – 250 μH

Sensitivity

0.5 % - 0.007 % (frequency change Δf/f0 in %)

Interfaces

CAN bus data interface, service interface at front (USB adapter type KA_SERVICE_AJUSB optionally available)

Outputs

switching output per channel: Open Collector

Dimensions

DIN rail enclosure: height: 99 mm, length: 114.5 mm, width: 22.5 mm

Operating / Storage temperature

-25°C to+80°C / -40°C to+80°C

Protection class

III (low voltage < 60 V DC)

Design

DIN rail mounting (TS35 EN50022), to be installed in housing or cabinet with IP54 necessary (pollution degree 2)

Terminal strip

- MSTBT 2.5/4 (top and bottom)

- TBUS system 1.5/5 (back side)

- functional grounding via integrated contact and DIN rail