LIMBOPLAST KSP 130

Cold Spray Plastic

LIMBOPLAST KSP 130 Cold Spray Plastic

LIMBOPLAST KSP 130 belongs to the group of solvent-free, sprayable, reactive systems and consists of two or more components which that chemically react to form duroplastic, thin-layer markings. It´s suitable for bituminous surfaces (e.g. mastic asphalt, asphaltic concrete) and also concrete pavements (priming required). It can be applied as type I marking as well as type II rain safety marking with enhanced nighttime visibility in wet conditions.

RPA Test Reports by BAST for LIMBOPLAST KSP 130


Test report-no.


Layer thickness


Consumption


Drop-on material (DOM)


Traffic technological properties


mm


Material

DOM

Identification

(divergent identification possible - see relevant test report)

New condition


Used condition


kg/m²

kg/m²

Type I marking

2008 1DY 03.13

0.3

0.474

0.40

Swarco No.1 beads Solid Plus 300-1000 T18 MK35

P6, S3, R5, Q5, T2

P6, S2, R5, Q5

2008 1DY 03.12

0.4

0.632

0.40

Swarco No.1 beads Solid Plus 300-1000 T18 MK35

P6, S3, R5, Q5, T2

P6, S2, R5, Q5

Type II markings

2008 1DY 02.08

0.6

0.948

0.60

Swarco plus9spots 30 300-1400 T18 MK35

P7, S4, R5, RW4, Q5, T2

P7, S2, R5, RW3, Q5

Type II markings injection

2008 1DY 03.05

0.4 wet


>0.6 with injection

0.632

0.45


0.45

Megalux 600-1400 T18 MK35

(injection)

Swarco No.1 beads Solid Plus 300-1000 T18 MK35 (after gritted)

P7, S3, R5, RW5, Q5, T2

P7, S1, R5, RW4, Q5

2008 1DY 03.10

0.6 wet



1.6 with injection

0.948

0.40



0.40

Swarco plus9spots 30 300-1400 T18 MK35

(injection)

Swarco No.1 beads Solid Plus 300-1000 T18 MK35

(after gritted)

P7, S3, R5, RW4, Q5, T2

P7, S3, R5, RW3, Q5

Downloads

Downloads